济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2011-02-26 00:15The right setting of Wentai 2000 software

Engraving equipment to support the HPGL commands
Engraving Machine serial port connected to the serial port 1 or 2
Lift height of the knife → 3mm ( the knife height can be resetted according to the actual situation)
Click "Settings"
(1) set "the port":
port P → serial port 1 or 2 data bits → 8 stop bit → 1 checksum: NONE
transfer rate → 9600
flow control → √ DTR / DSR √ XON / XOFF √ RTS / CTS

(2) set "Engraving Machine"
The order of a knife carried up and down, three parameters, the spindle is down → GV-resolution
The resolution of Z-axis: GV engraving machine series is for the 2540 lines / inch, HGV engraving machine is for the 4064 lines / inch
Lift height of the knife → 3mm ( the knife height can be resetted according to the actual situation)
The rotation direction of the knive when carving → clockwise direction
→ No compensation output

(3) set the "size and origin"
Maximum width, length can be determined in accordance with the actual
The level of vertical resolution and the same Z-axis resolution,
Namely: GV series engraving machine for the 2540 lines / inch, HGV engraving machine for the 4064 lines / inch (one of the early version of HGV 5.5 to 2032 lines / inch)
Coordinates at the origin - the left one, after carving knife → stop at the left side of a paper the way forward for the X direction.

(4) command set
Initialization IN; PA; PU0, 0, -300; (Note: all Arabic numerals 0)
PD go down, carrying a knife a knife going split PU Fu,
Homing! PG; Ending Fu; rest with the software

Click OK after the finish.
Wentai carving software can be directly output, one of F: on behalf of mirror, that is, when the full-page output will be Y-axis mirror
R: representative of rotation, rotation selection, full content of the output when a 90-degree rotation to do.

Wentai following examples of software applications, for reference, I hope everyone Wentai use software, wish other people prosperity. Wentai the U.S. are welcome to leave a message board at your program!

1, Wentai system (light boxes, banners, logos, such as the production system)

Components: computer + software +Wentai any brand.

Characteristics:with all of the features provided by Wentai software , you can achieve the production of the excellent display panels, light boxes, signs,

Slogans such as, in the lettering suitable agency, advertising company, decoration. Small investment, quick recovery.

Investment amount: 8,000 yuan to 40,000 yuan, including the computer. The actual procurement, configuration and because of market fluctuations, prices will vary.

2, the text of bills at the production system, spectacular views

Components: computer + software + Wentai wide printer, printing machine

Characteristics: the use of the support provided by Wentai typesetting graphics, image size can be modified to enrich the language typesetting functions, both at home and abroad on 10,000 kinds of graphics library, layout unlimited size can be carried out quickly and easily create posters, posters, etc.. Can be output format of the document.

Investment amount: 30,000 million -80000, specifically at the time of purchase will be different

3, small-scale mechanical sculpture Wentai system

Components: computer + software + Wentai engraving engraving machine of small size

Characteristics: the use of software Wentai sculpture features all kinds of publishing, many fonts and library, can be quickly mass produced all kinds of badges, signs, gifts, acrylic, words such as cutting, carving shop fit, advertising, gifts companies, and yield higher rates of return well

Investment amount: around 30,000 yuan -50000 range, depending on the different configurations and different market conditions.

4, seal engraving machine Wentai system

Components: computer + Wentai seals + seal engraving machine software.

Characteristics: the use of the seal to provide Wentai typesetting, as well as many in line with the national seal of the template library, you can quickly and easily create professional seal for special industries, a significant benefit.

Investment amount:: about 30,000 -50000 per month, Price will be the specific configuration of the computer and change the market.

5, Wentai wire cutting system

Components: computer + Wentai wire-cut EDM software + computer.

Characteristics: Wentai exclusive use of wire-cut algorithm, the production model from the inside out, logos, props, etc. At present, few of the users is extremely valuable investment opportunities.

6, large-scale three-dimensional cutting Wentai engraving system

Components: computer + Wentai cutting word + high-power engraving machine software.

Characteristics: the use of Wentai original cut from the inside out algorithms, coupled with the development of the tool Wentai compensation system plexiglass plate on PVC board, board materials, such as three-dimensional cutting, the production of large signs, completely replace the manual, because of the domestic application of late start, so a very good business, good benefits.

7, Wentai small laser engraving system

Components: computer + Wentai laser engraving laser software + low-power (30W or less) engraving machine

Characteristics: the use of laser Wentai seal all kinds of software template library of tens of thousands of species of all kinds, can seal production, signs, gifts, card production, suitable for art groups, advertising companies, sign shops, in small, effective quickly.

Investment amount: -50,000 around 30,000 yuan, a specific brand at the time of purchase and configuration will vary.

8, Wentai large-scale laser engraving system

Components: Wentai computer + software + high-power laser engraving machine laser engraving

Characteristics: the use of Wentai provide unique laser cut algorithm, instead of the traditional processing methods, fast, effective and wide application.

Investment amount: around 200,000 -600,000 yuan, due to the specific brand at the time of purchase and configuration, as well as market conditions change.

9, Wentai art glass production system

Components: computer + software +Wentai art glass related equipment

Characteristics: the use of Wentai provided in English and a large number of graphics library, a unique algorithm, to produce a variety of colorful art glass color draw.

10, sand carving system Wentai

Components: computer + software + Wentai blasting gun and ancillary equipment

Characteristics: the use of Wentai provided in English and a large number of graphics library, a unique algorithm, on a variety of materials (such as marble, board, etc.) to produce a variety of patterns, such as tombstones, such as wood portrait

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766