济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-05-31 11:33CNC engraving machine lubrication method

CNC engraving machine in use, how to lubricate, how kind of steps should be followed?

Lubrication is necessary as well as the role of lubrication analysis:
Engraving machine lubrication is to prevent and reduce component wear and prolong its service life and replacement cycles, reduce accidents and engraving machine failure, to ensure normal production, to improve the economic efficiency of enterprises of great significance. Engraving machine work in the long term, the screw, guide, there will be quite a lot of internal bearing impurities into the dust, causing screw, bearing rotation resistance, eventually leading to carve a little faster will be lost dislocation phenomenon. Therefore engraving machine in daily use should pay attention to the maintenance and cleaning engraving machine parts lubricated.
Engraving machine lubrication method steps:
1、select lubricating substance: a mixture of oil and butter, not too thick.
2、lubricated part: x.y.z axis screw, light bars.
3、lubrication steps: lubrication before the first screw, nut and bearing rails above the impurities removed, if removal can not afford, can be injected gasoline lubricant after cleaning and then gradually increase the speed for idling, that hold plates , three-axis running.
4、 lubrication cycle: as the working environment and working time machine to be, generally clean out debris after work every day. Come on various parts of each month, high-speed idling lubrication.
5、lubrication methods:
Y axis: lubrication is simple, relatively easy to clean oil side rail, and the bottom portion from the holder can screw into the filling, it is easier to maintain.
Remove the screws around the X axis to be, raised a shield, the right to open completely to mention the mixed oil injection to the rail, screw, screw head bearing was right there at the thrust bearing.
To open the guard at the Z-axis, screw, rails, bearing bottom thrust bearing is very clear, at this time to do the work as follows: Note down the operation of the mixed oil lubrication.
In three-lubrication, the available allen wrench on the motor shaft and the coupling between the screw head on the hexagon screws tightened to prevent the axis due to mechanical loosening caused some dislocation.
Carving confidential attention routine maintenance and lubrication, then your life will be longer engraving machine!
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766