济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-06-03 18:06Proper use of CNC engraving machine

Of CNC engraving machine is widely used, but the failure problem, so many customers helpless. Generally of CNC engraving machine spindle and other accessories without problems, mostly due to damage caused by improper operation engraving machine, so learning how to manipulate CNC CNC engraving machine is a top priority, in fact, many reasons as long as the familiar engraving machine, you soon be able to judge them malfunction. Jinan River CNC engraving machine experts following combination of spindle problems often appear rough introduction:

1, the spindle can not operate normally, first check the drive LED display shows the error code (see inverter manual error code entry).
2, there is a shaft axis can not move, this time to check the corresponding axis corresponding to the drive block is damaged. Inspection methods can use the substitution will not corresponding to the air shaft Unplug other dynamic shaft inserted in the corresponding drive on.
3, if the switch does not move after move normal axis, the axis may explain the corresponding drive block has been damaged and need replacing a good drive block, if you do not drive shaft or not it shows a faulty cable or replace the motor cable or motor. Triaxial not active, then check whether the air plugs and three-axis control box connected, the control box is powered on, the data line is and the control box and the computer host controller card connected. If the above are normal, please contact the party and sculpture factory.
Engraving from the processing principle, is a combination of drilling and milling machining, engraving machine multiple data input mode according to need with ease. Computer engraving machine has two types of laser engraving and mechanical engraving, these two types have high power and low power of the points. Because engraving machine very wide range of applications, it is necessary to understand the various engraving machine most suitable range of applications. Only suitable for low-power color plates, architectural models, small signs, three-dimensional crafts, because the power is too small to significantly affect the scope of its application. High-power low-power engraving machine engraving machine can do something, the most suitable for large-scale cutting, embossing, engraving.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766