济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-06-26 10:54Rust prevention method of engraving machine

Idle engraving machine, if the workshop environment is humid, especially in the summer, some components such as engraving machine bed, spindles, rails and other metal parts to rust easily, there is the electromechanical engraving machine spindle will rust, where these situation would impact engraving machine for everyday use adversely affect the performance impact of engraving, machine work noise, but also slowed down the progress of production and efficiency. Given engraving machine rust will bring such a serious impact, which means that we should take measures to avoid rusting engraving machine it?

1, the other pieces of steel surfaces, such as ball screws, hardened steel rolling rail raceway surfaces and steel fasteners should be every few days with a cloth or cotton dipped in butter rubbed, other parts should always observe whether there is a weak corrosion, if the application cloth moistened with oil erased, and the focus for future rust.

2, the other pieces of aluminum surfaces should be every few days rubbed with a cloth dipped in butter can also spray a layer of varnish, and often observe whether there is pitting.

3, the cooling water tank filling emulsified oil in order to facilitate the best rust, do not use water.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766