济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-07-05 15:27Select engraving machine

We choose engraving machine, you need to pay attention to the following five aspects:
1, format size choice: should be based on business needs and financial situation, to choose their own model and its power engraving machine size. Generally small-format engraving machine with 600mm × 600mm and 600mm × 900mm, width of the feed is 700mm. Engraved color plates are small format engraver most basic application, acceptance is very good. Then smaller engraving machine price with similar, but when color plate engraving cutting board, cumbersome and unnecessary waste. Large format engraving machine with 1200mm × 1200mm, 200mm × 1500mm, 1500mm × 2400mm, 2400mm × 3000mm, these models engraving machine Jinke width of more than 1350mm, now available in plexiglass and PVC plate dimensions are 1300mm × 2400mm, so it needs several models for large format engraving machine is suitable for customers.
2, the spindle motor: computer engraving machine spindle motor is a key component, the performance of the computer engraving machine would have a critical impact on the performance. Machining spindle is usually divided into two categories, precision machining spindles and spindle power cut. Precision machining spindle is characterized by low noise, high speed, altitude, especially suitable for processing fine artifacts such as seals, nameplates, badges and other gifts. Such motors are usually for high-speed frequency conversion motor, less power, like the 250W or less. Disadvantage is the ability to cut thick material is poor, substandard cut thicker materials. Power off the spindle, mainly used for cutting, high-power moment, is characterized by power, cutting ability, especially for cutting-yu, three-dimensional characters, of course, can produce badges, nameplates, stamps and so on. According to such a high-power spindle motor characteristics can be divided into high-frequency AC brushless motor and AC motor brush.
3, the control mode and speed selection: control mode can now be divided into three types, one is all complete computing tasks with computer controlled engraving machine at work when the computer is in working condition, can not be other typesetting work, this might solid computer misuse resulting in waste. The second use of single-chip control, this controller can work simultaneously engraving machine layout, but can not turn off the computer, which is actually equivalent to savings of 7 a computer, computer misuse and reduce waste caused. The third uses the USB port to transfer data, the system has more than 32M of memory. As long as you finish saving the file, you can right away completely from the computer, turn off the computer or other typesetting, this approach greatly improves the work efficiency of engraving machine.
4, the guide: Be sure to use large format engraving machine imported square rails widened, its load capacity and the ability to maintain the accuracy is more than 30 times round rails, ensuring high-quality high-speed engraving machine.
5, precision: 1mm small-format machine engraving characters, or large format engraving machine engraved 1.5mm small print, under a magnifying glass to be seen very clearly.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766