济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-07-25 19:09Engraving machine working principle and process

Engraving machine controllers generally of two types: industrial control computer and embedded DSP control systems, industrial control computer has good scalability (with other engraving machine and computer networking), powerful computing capability, etc.; while embedded DSP control system with small size, simple operation. Engraving machine working process, the scan head through the lens of the light irradiated to the original is scanned rollers, their different amount of light reflected through the photomultiplier tube is converted to an electrical signal and an imaginary optical mask signal, the signal is mixed with the machine's standard comparison output signal parameters and then after conversion, series-parallel switching, level selection and core storage and channel selection for level correction parameters converted into image processing and signal output amplified to drive electronic engraving head carving on the gravure cylinder to form gravure corresponds with the original layout. Engraving machine work, original carved drum rollers and synchronous operation, and engraving system moved axially along the drum, with the sharp diamond knife carving drum carved out according to the signal network points. Engraving system by the scanning system controlled by a computer, the hole formed on the copper mesh drum, an additional signal is generated by the computer, this signal is continuously in a regular manner to make the vibration cutter, mesh size and the depth of the hole density is determined by the document , scanned originals density and network points are carved quantitative relationship between the depth can be adjusted on a computer.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766