济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-07-26 11:45Stone engraving machine carving skills

Relative to other engraving equipment, stone engraving machine equipment configuration requirements are higher, which is due to be determined carving material, relatively speaking, more difficult to design, engraving equipment when in use, but also to pay attention to sculpture carving techniques and methods. Here, we say that the use of stone engraving machine is the most commonly used layered sculpture, engraving below on the stratification in detail.
Stone are generally very large bump, flat carving looks closer dimensional carving, so this requires a very large depth of carving and engraving machine tool maximum depth is limited under the knife, furthermore determined once carved stone material can not be too deep deep, otherwise easily damage the tools and equipment, so we must use to layered carving. Under normal circumstances we are through the image generation model, open carving patterns, set about sizes and embossed relief depth, where the depth refers to the total depth of relief, set up after we click on the preview renderings 3D relief effect. The next step is to generate tool paths, and select "processing relief", first select the tool, here to pay special attention, in which there is a tool to edit parameters "step away from the next cut", this value is the distance between each layer under the knife, according to material hardness and quality of the tool set in the tool below the selected a "multi-layer cutting the z-axis," remember to do when layering to select the check box next to the first path in the z-axis height enter the first layer you want engraving depth, the number is negative; finally a path Z height can enter the total depth of relief, but also for negative values​​. And do not need the rest of the settings on the same hierarchical engraving. All set up, you can look at the tool path simulation, we can see the resulting path is hierarchical calculated into the path of stone engraving machine control system can be stratified processed.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766