济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-07-29 15:47Woodworking engraving machine fast engraving

Woodworking engraving machine how fast carving?

1, for those irregularly shaped object was carved on the surface seems to have been fixed very tight, and when under pressure will be back and forth. At this time, you can try some scrap of the object underneath it to increase friction. Another is to keep carrying the packaging article, though irregularly shaped object, but brought the package itself may be very regular, and easy to be fixed, plus a small straps, it is irregularly shaped objects easy to be fixed. Try fixing its rules or instruments of the site, and give up its irregular parts.

2, check the selected engraving head pliers or whether to use the wrong card, meanwhile, woodworking engraving machine pliers or wear chuck carved objects can lead to dislocation. Overtightening pliers or chuck, blade contact with carvings at the moment will lead carved objects pop up.

3, carved objects if the pressures suffered under great consider whether you have to use the nose cone of the knife, if the diamond blade engraving machine moves in the process of carving the pressure is too large, it will cause the pressure side of the tool is carved objects movement. If you use an incorrect diamond knife, will lead to the same problem. A 90 or 100-degree diamond knife carving material in depth, and makes the process of carving material being moved.

4, for engraving plastic pattern can be posted tape affixed to the object to be engraved on the back, and then affixed with adhesive tape on one side of the liquid spray glue, and then paste it in a surface can be voided, so avoid using double glue, leaving a clean surface is difficult. Because the tape is easy to peel and clean up posted. The use of specialized carved scallops, the tape on one side than the other side of the adhesive strength, so plates can move or replaced.

5, due to wood engraving machine is often equipped with multi-function pliers or chuck, and that they are made ​​of iron, it is easy to damage the carvings or make it fall in the engraving process, then use some rubber cap or rubber tubing carved objects for fixed would help.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766