济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-08-01 11:00Stone engraving machine tool breakage problems

Stone engraving machine with particularity in the process of carving a recurring problem is the cutting knife phenomenon, mainly because they are relatively hard stone, after all, if the engraving process cooling water supply is not timely or processed too fast, too slow spindle speed will affect the tools and materials. That should be how to solve the problem of stone engraving machine cutting knife it?

If the tool is broken, the operator should immediately halt the machine, and then look at the moment of the processing line number and a detailed record, carefully check to see whether there is at the cutting knife knife cutting knife, if there is to be taken out. The most important thing is to analyze the main cutting knife, to avoid the next recidivism. Then is to replace the tool, for good tool should be noted that after the definition of the origin, the stone engraving machine back to the datum after X / Y two axis position is correct, but the need to redefine the Z-axis, which is mainly based has been done the style pattern defined to operate.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766