济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-08-07 14:30Stone engraving machine way off the knife

1, Cut in: Falling knife carving tool path from the starting point of the knife to the side into the depth of processing, and then follow the radius of the arc or line length parameter settings, cut into the start of the path, during carving. This approach ensures that no stone left in the engraving surface engraving machine tool marks.
2, Progressive: Falling Knife tool when not directly fall to the set engraving depth, but in the process of falling down to a certain depth, the tool is lifted, then the next until the whereabouts of a certain depth to set the depth of the position. This approach avoids the carving knife under high hardness of the material, because the momentum is too large stone damaged or deformed or even cutting knife tool.
3, oblique style: the way off the knife, glass engraving tool not fall vertically, instead of using a certain angle oblique fall, so you can avoid making art of stone carving because momentum is too large broken glass, but also less small marks left in the engraving surface.
In short, stone engraving machine falling knife three ways, according to the nature of the stone, different orientations are used interchangeably, so as to better protect the tool and stone.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766