济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-08-14 11:30How to fix carving material

We use the engraving machine carving items, carved under pressure if the subject matter is very large, consider whether you want to use must be the nose cone of the knife, if engraving machine engraving diamond blade in the process of moving the pressure is too large, the tool side pressures will cause movement of the object to be engraved. If you are using an incorrect diamond knife, will also cause the same problem. A 90 or 100-degree diamond knife carving material in depth, and let the material in the process of carving movement. If a plastic material, adhesive tape can be posted on the object to be engraved on the back, and then affixed with adhesive tape on one side of the liquid spray glue, after which it can be affixed to a surface aside, so it is possible to avoid using double plastic surface, leaving a clean surface is difficult. Posted tape very easy because we can peel and clean. The use of specialized carved scallops, the tape side than the other side of the adhesive is strong, so is the ability to conduct random plates moved or replaced. For those irregularly shaped object was carved on the surface seems to have been fixed very tight, and when under pressure will be back and forth. In this case, the object can try some of the following waste materials to increase the friction pad. The other is retained article comes packaging, though irregularly shaped object, it brought the package itself may be very regular, and easy to be fixed, plus a small straps, irregularly shaped objects on particularly vulnerable to fixed. Try fixing its rules or instruments of the site, and give up its irregular parts.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766