济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-08-20 11:26Stone engraving machine timing processing setting method

"Time Machine" allows the operator before carving to know in advance carving time used, which is calculated according to the setting of engraving machine parameters, processing currently carving documents used in time, and this time does not include the middle of the tool, positioning time, is an estimate, the impact "time processing" of the engraving parameters including feed rate, cutting speed, cutting off the delay, Z axis travel, etc., but also with "priority mode", whereas in woodworking engraving machine, stone engraving machine processing times range, customers can also do other work arrangements, so greatly improves the utilization of human resources.

Engraving machine processing specific set timing method: Depending on the type of stone engraving machine travel range, the way the machine by hand movement, each movement of the machine to the limit of three-axis position until the hit limit switch, were recorded X, y , Z axis can move to the minimum and maximum coordinate values ​​of the input parameters of the corresponding position in the position, hand movement to control the stone engraving machine tool operation convenient location, record the current machine coordinate value, enter it into the appropriate "location parameter "can be.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766