济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-08-20 11:32Stone carving machine noise reduction

Stone engraving machine is generally used in stepper motor, stepper motor with a pause at every step, the noise is normal. At a certain frequency, stone engraving machine also produces body resonance, with a perceptible noise, such noise will not affect the normal use of the machine. And the harmful effects of noise on the stone engraving machine mainly for the following two categories:

1, stone engraving machine spindle motor is running an abnormal noise, such noise generation, stone engraving machine spindle bearings prove the existence of quality problems or spindle bearing life has come to, after the decline in the quality or worn or damaged, then you can consider replacing.

2, the axial stone engraving machine emits unusual sounds when walking, stone engraving machine such phenomena exist in the X-axis more. Multi-axial motor bearing damage or lack of lubrication X-axis rails, too dirty, too tight, ball wear, ball dropping, etc., must be timely treatment.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766