济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-08-30 11:10Stone engraving machine layered carving

Stone are generally very large bump, flat carving looks closer dimensional carving, so this requires a very large depth of carving and engraving machine tool maximum depth is limited under the knife, furthermore determined once carved stone material can not be too deep deep, otherwise easily damage the tools and equipment, so we must use to layered carving. Normally we are through image generation model, open carving patterns, set about the size and embossed relief depth, where the depth is the total depth of the relief. Set up after we click the 3D renderings preview relief effect. The next step is to generate a toolpath. Select "processing relief", first select the tool, here to pay special attention, in which there is a tool to edit parameters "step away from the next cut," this value is under the knife each distance, according to the hardness of the material and the quality of the tool to set fixed. The tool selected below a "multi-layer z-axis machining," Remember when you want to check to make layered behind the box. In the first path to the z-axis height of the first layer you want to enter the engraving depth, the number is negative; finally a path Z height can enter the total depth of relief, but also for negative values​​. And do not need the rest of the settings on the same hierarchical engraving. All set up, you can look at the tool path simulation, we can see the resulting path is hierarchical calculated into the path of stone engraving machine control system can be stratified processed.

Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766