济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-09-26 13:58Engraving machine use matters needing attention

Engraving machine if the long-term do not, should be regularly filling empty walk, to ensure that the transmission system flexibility, first clean the rail and screw, a cloth (no hair) to guide and lead screw on the oil and debris cleared, machine in working phase, should be in the length of days, will guide rails, rack, screw on the dust, sand cleaning time, and brush on the rail oil, (the prohibition of the use of butter), oil after filling the slow walking back and forth, ensure that the lubricating oil can be evenly applied to the rail and screw.

Check the dustproof, waterproof function often have a look, dust cloth has no wear, if wear, water, sediment, dust through the dust cloth directly splash into the guide rails, rack, if not particularly busy, it shall immediately stop using, and contact with the manufacturers, to buy cloth dust new replacement.
In the stone engraving machine used in the process, the cutter head need water for cooling, water is added in the process, the cooling water shall be aligned cutter head injection, not to handle injection, to handle, may cause the main influent short-circuit. Every six months check a X, Y axis belt wear, if wear is more serious stone engraving machine, should buy the belt to the manufacturers, the replacement.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766