济南江河数控

中文版 | ENGLISH | РУССКИЙ

Your position:主页 > TECHNOLOGY >

江河数控、雕刻机

2013-10-09 12:41Engraving machine spindle motor types

We used woodworking engraving machine is equipped with a water-cooled spindle motor spindle and air-cooled spindle, spindle both their advantages and disadvantages are:

1, from the motor control mode, the water-cooled and air-cooled motors are used in rotating coil nails, almost all water-cooled frequency control, frequency conversion air-cooled spindle can be controlled and non-conversion.
2, water-cooled spindle requires attention to maintenance, frequently changes the water or the use of industrial water cooling machine, so the life of the spindle to be much longer than the air-cooled or air-cooled motors nowhere near its life.
3, water-cooled spindle precision higher.
4, water is used to cool the high-speed spindle rotation circulation heat generated, after the temperature of the water through the flow will not exceed 40 degrees, and the spindle cooling fan means to heat, the cooling effect is certainly not as good.
5, water-cooled spindle basically no noise, but the air-cooled spindle is very loud.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766