Engraving machine spindle speed problem of slow_我的网站



Your position:主页 > TECHNOLOGY >


2013-10-11 11:16Engraving machine spindle speed problem of slow

Because engraving different materials, different shapes, when the engraving spindle speed is not the same, so the use of engraving machine spindle speed will appear in the case of achieving the desired objectives, and that if the spindle speed is not up should be resolved, Jinan rivers CNC experts to introduce you to the following three ways:

1, in the control box to adjust the new inverter parameters.
2, Weihong card or DSP hand disease control system parameters are incorrect.
3, check the data cable, wiring board is damaged.
4, check the drive circuit board and wiring is correct.
By examining the above four aspects, generally can be resolved woodworking engraving machine, stone engraving machine spindle speed reach issue. In addition, we have to do maintenance work engraving machine is safe and healthy operation of the machine in order to avoid problems.
Add: No.999 Hualong Road, Jinan city, China
TEL:86-0531-89001332 13864197735 18906416766